Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N3HG6 UN - PA9T-GF30 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Proprietà Specifiche Materiale - Raccomandazione de Processabilità Stampaggio ad Iniezione - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Partially aromatic, glassfiber reinforced polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures, good long-term thermal stability and outstanding chemical resistance for highly stressed parts. The product can be characterized as compound with high toughness, stiffness, extremely low water absorption and outstanding dimensional stability. It features high flowability and allows filling of complex parts with thin wall thickness. The product is easily processable with excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, Auto E&E, sensors, pumps, fuel cell
E&E: Connectors
Consumer goods: Home appliances, consumer electronics

Caratteristiche Fisiche	secco/cond	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.5 / *	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.0 / *	%	ISO 294-4, 2577

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	10500 / -	MPa	ISO 527
Carico unitario a rottura	190 / -	MPa	ISO 527
Deformazione a rottura	2.5 / -	%	ISO 527
Resistenza all'urto Charpy, +23°C	65 / -	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	60 / -	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	9 / -	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	9 / -	kJ/m²	ISO 179/1eA

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	300 / *	°C	ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min	120 / *	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	270 / *	°C	ISO 75-1/-2
Temp.di rammollimento Vicat, B	280 / *	°C	ISO 306
Reazione al fuoco a spessore h	HB / *	class	IEC 60695-11-10
Spessore provato	0.8 / *	mm	-

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	2 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	0.9 / *	%	Sim. alla ISO 62
Massa volumica	1370 / -	kg/m³	ISO 1183

Proprietà Specifiche Materiale	secco/cond	Unitá	Norma del test
ISO Data
Numero di viscosità	100 / *	cm³/g	ISO 307, 1157, 1628

Raccomandazione de Processabilità Stampaggio ad Iniezione	Valore	Unitá	Norma del test
Pre-essiccamento - Temperatura	120	°C	-
Pre-essiccamento - Tempo	8	h	-
Umidità del Processo	≤0.05	%	-
Temperatura di fusione	320 - 340	°C	-
Temperatura dello stampo	100 - 160	°C	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet, Colore naturale

Caratteristiche speciali

Stabilizzato o stabile al calore

Caratteristiche

Resistenza del fuso, Stabilità termica

Resistenza Chimica

Resistenza chimica generale

Disponibilità geografica

Nord America, Europa

Altre informazioni

Stampaggio ad Iniezione

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 125 - 170 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.